DIY Kawaii Cat Shaker Clutch Bag Silicone Mold with Findings - Clear Resin Handbag Craft Supplies for Jewelry Making & Cosplay Accessories

Product Description

Finshed products display-made by customers How to make shaker clutch with resin 1,Fill up the mold,make 2 pieces (This set only includes 1 bag mold, you will need to resin 2 times to make 2 pieces;if you wanna resin 2 pieces at the same time, you will need to buy one more bag mold.) Optional: 1)Measure and cut the plastic sheet,cut 2 pieces; 2)The plastic sheet will be glued to the metal frame, you can cut the excess 3)Apply UV resin,place&glue the plastic sheet onto the frame; 3)Cure the resin with UV light 2,Apply UV resin along the gap of the metal frame 3,Plaec and glue the resin pieces to the frame on both sides 4,Attach the chain 5, Fil up the small mold with resin to make the shaker part 6,Demold the resin piece & fill it up with glitter/embellishments,etc. 7,Apple UV resin onto the egde of the resin piece 8,Place and glue the cluth onto the shaker part 9, Done! Tips 1, Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents. 2,A finished Bag need many bag DIY materials,not just a mold, please buy accessories according to instruction. 3,you will need around 200-300ml of resin to make the clutch bag with the shaker part Use only AB Epoxy Soft resin if you want to make a flexible bag. Or a Hard type AB resin if you want a more sturdy bag. Measurement What you get: 1 Pc x Silicone bag Mold, 1 Pc x Shaker Mold (smaller one),1 Pc x Metal bag frame, 2 Pcs x Clear PVC Cloth, 1 Pcs x Bag Chain as picture shows.Please read before place your order!!! Round Bag Mold : Diameter 18 cm/7" - Round shaker mold: Diameter 16 cm /6.3" Rectangle Bag mold : 20 x 11.8 cm/7.9“x 4.7”- Rectangle shaker mold: 18 x 9.6 cm/7"x 3.8" Heart Bag mold : 16 x 15.5 cm/6.3"x 6.1" - Heart shaker mold: 12 x 14 cm/4.7"x 5.5" Cat Bag mold : 13 x 16.2 cm/5.1"x 6.4"- Cat shaker mold: 14x 11 cm/5.5" x 4.3" Bag Chain ：114 cm/45" Clear PVC Cloth.:15 x 10 cm/5.9"x 4" (Optional) Package includes: 1 Pc x Silicone bag Mold 1 Pc x Shaker Mold 1 Pc x Metal bag frame 2 Pcs x Clear PVC Cloth 1 Pcs x Bag Chain There is no instructions attached to the items,if you are new to resin, please check the related videos on the product detai page or find the tutorial videos on our FB page. FQA: How to Clean Resin Molds? 1. When finished with your silicone molds, wash it with warm water and mild soap. 2. Use a soft cloth to wipe clean. 3. Make sure your molds are completely dry before storing them. How to Reduce Bubbles? 1. Warm your resin before using it. 2. Mix the resin and hardener slowly and deliberately. 3. After you've completed mixing the resin and hardener together, let it stay about 5 minutes. How to Demold: Usually, most of the resin pieces could pop out from the mold easily. There're also 2 methods to make this process easier. 1. Use mold release to keep the resin from sticking to molds, and it is great for prolonging the life of molds as well. 2.After your resin pieces are completely cured, pour some soapy water into the mold. The things need to be pay attention The metal in the frame The metal in the frame is used for fixing the lock of the frame. Do not need to straighten it, the lock will be loosed if you do that. The not even edge of the resin piece It's how the mold designs. The not even edge is for sticking into the frame properly. Before demold, please make sure the resin piece is compeletly dry. Stick the resin piece into frame We sugeest to use glue gun to stick the resin piece into the frame. When you stick the resin piece, you have to really push it in the frame until it clicks. Putting in PVC plastic sheets to line the purse Could make a clutch with the PVC clothes (come with the pacakge) on both side as a barrier so items don’t fall out when opened while standing up. We also sell them separately, please check below Please note: Only shaker mold (the smaller one) can not make purse, this kit only includes 1 bag mold, if you wanna resin 2 sides of the purse at the same time, you will need to buy the other bag mold. The bag mold and the shaker mold can be used for many times. If you wanna buy them separately, please click the below pothos. We also sell them separately, please check below Please note: Only shaker mold (the smaller one) can not make purse, this kit only includes 1 bag mold, if you wanna resin 2 sides of the purse at the same time, you will need to buy the other bag mold. The bag mold and the shaker mold can be used for many times. If you wanna buy them separately, please click the below pothos. Rectangle bag mold round bag mold heart bag mold rectangle metal frame Heart frame Silver rectangle metal frame Add to Cart Buying Options Add to Cart Add to Cart Add to Cart Buying Options Customer Reviews 4.1 out of 5 stars 50 3.7 out of 5 stars 8 4.4 out of 5 stars 11 4.6 out of 5 stars 52 4.6 out of 5 stars 5 5.0 out of 5 stars 6 Price $17.99$17.99 — no data $16.99$16.99 $17.99$17.99 $16.99$16.99 — no data DIY ✓ ✓ ✓ ✓ ✓ no data